L Shaped Modular Glass Food Counter Guide

Below is a step by step guide in how to successfully measure and order your L Shape Modular Food Counter. These counters have been designed with catering and hospitality in mind and are available in the options noted on the dropdowns on the right. These counters are in stock now and can be dispatched quickly for fast delivery. The counter is perfect for any small food retailer, restaurant or café that needs a good value product to display their goods without breaking the bank.

Display Height Required

Using the dropdown boxes provided, first select the height you'd require for your front and return display counters. There are 4 choices ranging from 310mm to 610mm.

Front Display Measurement

Once you have decided on the height you are after for the display unit you'll then see the various combinations on offer to yourself. You'll need to decide which sizes you'd like to go for before moving onto the next stage. The 2 sizes we are able to offer at the moment are 400mm or 500mm Depth.

Return Display Measurement

In this section, you will be provided with additional combinations (whereby the depth can now be either 400mm or 500mm, which ever you prefer). The height will have to remain the same as for the front display otherwise the modular connection with not connect.

Left / Right Side Option

Next up, you now have to decide whether you'd want your return counter on the left or right hand side of the front display unit. The image above which is there to help give a visual understanding of how your counter would look is based on a left sided module fit (a right handed option will therefore have the return out showing on the right hand side)

Base

Only a couple options left to choose now and you are nearly complete with your own L Shape Modular Glass Food Counter. Here, you need to decide what base you would like, each are self explanatory in the Silicone Fit means you will put the counter down on your unit then silicone round. this helps prevent crumbs, drink etc getting under the unit. Discreet Rubber strip foot as it sounds is a strip of rubber, about 3mm think that is placed under the counter, you then just place the counter on your worktop. lastly, is aluminium channel, this will all be pre-cut however would need to be drilled into your worktop, your counter will then sit within the aluminium channel.

Note: The choices for the Front Display Base and Return Display Base have to be the same ones!

Front Counter Only Shelf

Last bit to decide is whether or not you would like a shelf to be installed in the Front Display counter only. Due to how the counters will be made, you are unable to have a shelf within the return counter.