The first thing for you to decide on your glass sneeze counter is the required size. (All of our measurements are in millimetres).

We have a number of pre-configured sizes for you to choose from.

Width - (W)  - Is how wide the unit is when viewed from the front.
Depth - (D) - Is how far the unit extends back when viewed from the side.
Height - (H) - Is the unit height when viewed from the front.

We offer four different foot finishes/installation options for your glass sneeze guard. Different foot choices will suit different situations, so we leave this up to you.

1. Customer Silicone fit 
   Plain glass suitable for sealing down to your work surface using a clear adhesive product or for locating into a prepared channel
2. Clear VHB Tape
   A clear High Bond Adhesive (VHB) tape applied to the glass in our factory, suitable for securing the glass permanently and also isolating it from hard surfaces such as stone, stainless steel etc.
3. Discrete Rubber Foot
   A discrete rubber foot which is fitted to the glass in our factory using an adhesive plastic extrusion. Suitable where you need to be able to re-position the glass unit or remove for deep cleaning. Also isolates the unit from hard surfaces such as stone and stainless steel.
4. Aluminium Channel
   An anodised aluminium channel cut to size in our factory and supplied loose for you to fit to your counter top. Suitable where you need the glass unit to be permanently fixed. Also isolates the unit from hard surfaces such as stone and stainless steel.

Please note, Futureglass will not as standard, carry out the installation work. If you require us to install the glass sneeze shield, then please contact us to see if this will be possible in your area. An installation fee will be charged.

Doors can make a great confidence boost to customers choosing the best hygiene and freshness for the product.

The supplied doors lift out of the cabinet easily for cleaning or if the doors are not required in winter months. Doors are fitted into a factory bonded top channel and a bottom channel is supplied with high bond tape to allow you to easily fit to your countertop. They are supplied with edge buffers and handles.

Instructions for cabinet doors are in the downloads section towards the bottom of this product page.

Sliding door option shown here on a unit with a glass base

You can choose to add shelves to your unit, which will be permanently UV-bonded in at the time of manufacture.

Deep Shelves are 45mm shorter than the cabinet's depth as standard. However, the depth of the 600mm deep shelves would be 455mm deep, the same as the 500mm deep shelves. 

Shallow Shelves are not as straightforward as the above, so we have listed the shallow shelves available for each different depth below: 

The 300mm deep display case has only 1 type of shelf available, which is the 255mm deep. 

The 400mm deep display case has a 255mm shallow shelf.

The 500mm deep display case has a 255mm shallow shelf.

The 600mm deep display case has the 255mm and 355mm options for a shallow shelf. 

Shelf Spacing - You can specify the height of the shelves you add -

The first shelf space will be the distance between the underside of the top panel and the top of the shelf.

The second shelf space will be the distance between the underside of the first shelf and the top of the second shelf,

etc...   Remember that each shelf takes up 10mm in height, and so does the top panel. So a 410 mm high counter with one shelf will have only 390mm of usable space inside. A central shelf would give you the following layout: 

10mm thick top panel 

195mm usable space

10mm thick shelf 

195mm usable space

Existing worktop 

Our handy visual display shows what your display case will look like.

You can choose to add the option of commercial grade LED lighting installed in your counter here at our factory. 

A choice of cool or warm white commercial grade LED lighting with a diffused (no hot spots) evenly dispersed light fall.

Mounted in a slimline aluminium channel we use a micro tape and channel so that it is unobtrusive when viewed from outside by your customers. 

Lighting inside the counter brings your products clearly into view and minimises external reflections that distort or restrict your customers view of what you have to offer.

Customers are drawn to the products inside as they are highlighted within the surroundings and can invite more sales.

How your counter might look without internal LED lighting

How your counter might look with warm white internal LED lighting

How your counter might look with cool white internal LED lighting

All of our fast delivery counters are manufactured using 10mm thick glass.

All of our glass is toughened so breakages are unlikely to occur.

All of our counters are packed suitable for their method of delivery.  On our own vehicle the glass has an anti-scratch film attached and the edges protected with impact absorbing foam.
if being delivered by courier they are packed in the same way but are additionally boxed or strapped to a wooden pallet. On some occasions you may notice that the foam edge protection has been re-used - this is to allow us to cut down on our environmental impact and in no way compromises the safety of the units transport.

This section allows you to include any information you feel is relevant. Please note that while we will always do our best to accommodate your requests this will not always be possible. If you have any questions, please don't hesitate to contact us or visit our knowledge page.

Once you have designed your perfect custom glass sneeze counter, the page will automatically display the price of your unit.